From first enquiry to installation: how we run every project in Lucena
Ordering a made-to-measure piece feels far less daunting when you know what comes after each step. This page walks you through the stages of a wardrobe or walk-in wardrobe project in Lucena and the surrounding area, from the first enquiry with photos and measurements to the final check once the furniture is fitted, and shows at each stage what you decide, which document you receive in writing and what information it helps to have to hand.
- 01Ballpark price
- 02Measuring
- 03Design
- 04Final quote
- 05Approval
- 06Manufacture
- 07Installation
- 08Final check
Shape your next wardrobe.
Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.
Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.
The eight stages of your order
- 01By WhatsApp
Guide price
Tell us what you're after and send us a few photos of the space, the approximate measurements and your home address in Lucena. In return you receive a guide price, which is confirmed once we have carried out the measuring visit.
- 02€50 if you don't order
Measuring visit
We agree a time with you to come to Lucena to see the space and how to get to it. If you then decide not to give us the project, you'll pay €50; if we do the work, you pay nothing for that visit.
- 03Depends on the project
Design and plans, if needed
Once we have the dimensions of the space, we get on with making it, and in the Lucena proposal we put in writing what we have agreed.
- 04In writing
Final quote
Once the measurements are final, our Lucena team prepares an itemised quote that pins down the interior layout, the materials, the hardware, the installation and the final price.
- 05Agreed deposit
Approval and deposit
If the proposal suits you and you pay the deposit we have agreed, we start making your wardrobe for Lucena.
- 062–3 weeks on average after the deposit
Manufacturing
Once you approve the project, our workshop shapes every piece of your furniture and packs it up, ready to leave for Lucena and be installed.
- 07At your home
Installation
We bring the furniture to your home, install it and adjust the doors, fronts and finishing trims.
- 08In writing
Walk-through with you
We check the doors, finishes and how everything works, and note down any outstanding adjustments in writing.
Stage 01
What we need for an initial assessment
- —We start with what you want: a fitted wardrobe, sliding doors, a walk-in wardrobe… or you may not have decided yet
- —Neighbourhood or town
- —In centimetres and approximate: width, height and depth
- —One straight-on photo of the space and two more showing each adjoining wall
- —Decide what goes inside: shirts and coats on hangers, folded jumpers, shoes and suitcases
- —Preferences for doors and finishes, if you already have any
No drawing or exact measurements needed.
Stage 02
What we check when we come to measure
- —First we check the width and height at several points, so we can spot uneven ceilings or walls
- —Floor level and skirting board
- —Sockets, switches, radiators, window recesses or beams
- —The area that must be kept clear when the wardrobe doors open
- —If the materials have to reach an upper floor, we first check the building's entrance, stairs and lift
Stages 05–08
Approval and installation day
How approval works
Once we're in Lucena and have the exact dimensions of each space, we sort out the interior layout, the type of doors, the finishes and the hardware, and put it all in black and white in a detailed quote. Your go-ahead and the deposit payment set the workshop in motion.
What you prepare
To work in Lucena we need a room cleared of furniture, easy to walk around, with the flooring and walls already finished. If sockets need moving or partition walls need taking down, that preparatory work is done first.
What we do
The wardrobe is installed, adjusted and checked in your presence in Lucena, and we give you a written list of any outstanding snags. If you'd like us to remove the old one, just tell us and you'll see it reflected in the quote.
First guidance from photos and measurements
It all starts with what you have at home: a wall, an alcove, a bedroom that has become too small. You can describe it in the quote form or let the configurator prepare a design with your details and send it to the team. Approximate measurements and a few photographs are enough to get started.
With that, the team will send you a guide price within a day, at no cost. It is a starting point so you can see where the project is heading, not a commitment: it helps you decide whether to go ahead, change the door system or adjust the interior before anyone visits your home.

When we come to measure up your room in Lucena
The measuring visit is the moment the project stops being approximate. At your home we check the real dimensions, how square the walls are, any unevenness in the floor, the position of sockets, radiators and windows, and the swing of the bedroom door. It is quite common to find that an alcove is a couple of centimetres narrower at the top than at the bottom, and that gets sorted now, not during installation.
The visit costs €50 if the order does not go ahead, and it is not charged when you place your order. If you live in a hamlet outside the town or in a neighbouring municipality, let us know the address and access details in advance so the date can be organised properly.
Latest work by SI, ARMARIO
@si.armario
Made-to-measure wardrobes and walk-in wardrobes
Latest posts
Have you already measured the space?
Send us a photo of the space and the approximate measurements by WhatsApp, and in Lucena we'll give you initial guidance on your wardrobe.
When a project is needed and how we confirm it with you
- 01
For a simple single-wall wardrobe, a clear plan is enough for the proposal. When there is a walk-in wardrobe, a loft room or several coordinated pieces, a more detailed design is advisable, with elevations showing hanging rails, shelves and drawers, and a list of materials for each part.
- 02
We go through this document with you before moving on to the next stage. This is the time to change the height of a rail, move a drawer or decide whether the shoe rack goes at the top or the bottom. Changes made at this point are the easiest and cheapest, because no board has been cut yet.
What the final quote includes
After measuring up, the final quote is drawn up. It must detail the final dimensions, the number of units, the type and number of doors, the materials for the doors and interiors, the hardware, transport and installation, as well as how VAT is treated. If anything is left out, it appears as an exclusion rather than a surprise later on.
Compare it with the initial guide price: some adjustments are normal, and what matters is that every difference can be explained by a specific detail, such as a corrected measurement or a change of finish. The terms of the work and of the after-sales service are set out in writing in that same document.
Approval, changes and agreed payment
Once you are happy with the quote, you approve it and the payment terms are agreed. From that moment, the design and materials are fixed so that manufacturing can begin. If you want to change something afterwards, it is possible as long as the pieces have not been cut, although the price or schedule may change, and you are told before anything is applied.
We recommend calmly checking three things before approving: the colour and finish with a sample in front of you, the position of the handles and the height of each rail. They seem like minor details, but they are the ones people miss most afterwards.

Ask us to come and measure up in Lucena
- 01We only need your name and where you live.
- 02The date comes from a quick chat on WhatsApp, always based on your availability.
- 03The measuring visit costs €50; if you then order the furniture from us, we don't charge it.
Manufacturing and coordinating the installation
Manufacturing the pieces takes two to three weeks on average. During that time you don't need to do anything, other than leave the room ready. Installation is arranged separately, once the pieces are ready, and a date is agreed that suits your diary and access to the property.
It is worth confirming in advance whether the building has a lift, whether there are restrictions on working hours and whether the entrance allows long pieces to be unloaded. In a house with a narrow staircase, the most practical thing is to flag any awkward turns before the delivery arrives.
Getting your home ready for the arrival of the wardrobe
- 01
Before installation day, clear the wall, remove the old wardrobe if there is one and protect the floor. Check that the plinth and skirting board are in place, that nearby windows can still be opened and that there is an accessible power socket for the tools.
- 02
If there is any painting or flooring work still to be done in the same room, finish it beforehand. A wardrobe fitted on a floor that is later taken up has to be readjusted, and avoiding that is simple with a little coordination.
Final check and reporting any issues
Once installation is finished, we check the furniture with you: aligned doors, drawers that run smoothly without catching, firm rails, and finishing against the wall and ceiling. This is the moment to point out any outstanding detail so it can be noted down.
If you notice something that needs adjusting later on, write to us with photographs and your project details. The care page gathers maintenance tips and the information worth sending in such cases.
Questions
The questions people in Lucena ask us about wardrobes, answered clearly
Want to know who is behind the Lucena projects? Find out how SI, ARMARIO works.
Is what I'm told on the first day what it will actually cost?
No. It is a first estimate based on the details you provide. The final price is written up after measuring up at your home and agreeing materials and layout.
At what stage do I sign off the finishes and interior layout?
After the measuring visit, when you receive the final quote and the design. Until you approve both, adjustments can still be made.
Can I tweak the design once it has been approved?
It depends on the timing. If the pieces have not yet been manufactured, it can be changed, with a possible effect on the price and date, which we tell you about before going any further.
What is checked once the furniture is fitted?
Door alignment, how the drawers and sliding mechanisms work, the firmness of rails and shelves, and the finishing against walls and ceiling. Any detail is noted down at that moment.
Shall we start with step one?
From Lucena, to get started all you need to do is send us a picture of the space and three measurements by WhatsApp. Your phone's camera is more than enough.

