Made-to-measure corner wardrobes in Lucena

A made-to-measure corner wardrobe in Lucena turns the angle of a room, usually the most wasted spot, into genuinely useful storage. The challenge isn't filling the corner, but reaching what you keep inside it: the back of a corner is often a black hole if it hasn't been planned properly. Here we run through the ways of solving that, from the L-shaped wardrobe to rotating modules, and the measurements we need.

Shape your next wardrobe.

Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.

Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.

What a corner wardrobe does for a room

Plan · example Floor plan · corner wardrobe
2,60 m 2,10 m 123
1Corner module put to good use 2Doors that don't get in each other's way 3Two fronts with a matching finish

The corner is where two walls meet and where the fewest conventional pieces of furniture fit. A corner wardrobe makes use of that angle and adds linear metres of storage without taking up any more free wall.

In a Lucena bedroom with little usable wall space, an L-shaped wardrobe lets you concentrate the storage in a single corner and leave the rest free for the bed, the window or a desk. In long, narrow rooms it also helps to tidy the look of the space: the unit wraps around the corner and the longer walls stay clear. The idea is to gain capacity without the wardrobe dominating the room.

01

Three ways to approach the corner

There are three ways to close off a corner. The first is the L-shaped wardrobe, with two wings that meet in the corner and share a common module. The second is a diagonal or chamfered module that cuts the corner and eases the way through. The third is two straight wardrobes joined with a continuous front.

The L-shaped wardrobe gives the most storage, but it needs two free walls. The diagonal one uses less depth, although it softens the flow of movement around the room. With a continuous front, the corner looks like a single piece with no joins, which gives the feel of a built-in wardrobe. We choose according to the angle and the neighbouring furniture.

Made-to-measure white corner wardrobe with oak handles in a bright bedroom in Lucena
02

How to reach the back without creating unusable areas

The real problem with a corner is the depth: that point 70 or 80 cm from the door that your hand can't reach. A badly planned corner wardrobe turns into a lumber room where things get lost.

There are reliable solutions: rotating carousels that bring the shelves towards you, pull-out trays set at an angle, or a bifold door that opens up the whole section. If the corner is planned as a module with a hanging rail, an L-shaped rail with access from both wings is enough. You can also leave a high shelf for things you rarely use. What matters is deciding in advance what goes in that corner and how you'll get to it. A good rule is not to put anything you need every day beyond arm's reach: in a corner wardrobe, whatever you can't reach without effort ends up forgotten.

Have you already measured the space?

Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.

03

Doors and drawers that don't get in each other's way

  • 01

    In the corner, the doors of the two wings can collide with each other when they open. If one door opens onto another, neither opens fully, and a drawer in one wing blocks the door of the other.

  • 02

    It's solved with a clear division: one wing gets hinged doors and the other sliding ones; or a fixed module is left in the corner to separate the swing of the doors. Drawers are placed far enough from the corner. A two-wing corner wardrobe with doors designed separately tends to cause problems. We draw every door open on the plan to confirm that none of them catches on another, and we adjust the width of each door if needed.

04

Adapting to walls, windows and walkways

A real corner is almost never a perfect 90-degree angle. The walls may be out of plumb, a window may sit right in the corner, or a radiator may intrude on one side.

The corner wardrobe adapts with closing modules that absorb any unevenness, and with wings of different lengths. If there's a window nearby, we leave a low section, with a drawer unit for example, so as not to block the light. If space for getting past is tight, the wing can reduce its depth at the end. In every case, the plan shows how the route through the room works out, so you don't lose circulation space as you gain storage.

Instagram

Latest work by SI, ARMARIO

@si.armario

Made-to-measure wardrobes and walk-in wardrobes

Latest posts

05

What changes when measuring up a corner in Lucena

Measuring up a corner wardrobe isn't just measuring two walls. We need to take the length of each wing at three heights, check the squareness of the corner, the level of the floor and the ceiling height, and spot skirting boards, cornices or services.

A two-centimetre deviation in the angle completely changes the design of the corner module. That's why, for corners, we ask for more information: photos of both walls, the dimensions of door and window openings, and the position of sockets. All of this can be sent through the configurator, which prepares the design for the team. Once we receive it, we'll give you an approximate price within 24 hours; the measuring visit costs €50 only if you don't go ahead with an order.

Made-to-measure white and oak corner wardrobe with an open door showing the hanging rail, drawers and baskets in a bright bedroom in Lucena
Measuring visit

Ask us to come and measure up in Lucena

  • 01You leave us your name and your area.
  • 02We message you on WhatsApp to agree a day.
  • 03The measuring visit costs €50 and is free if you place an order.
06

Inside the corner: L-shaped rail, shelves and drawers

Inside, a corner wardrobe can be organised in sections: the long wing with a hanging rail, the short wing with shelves and drawers, and the corner itself with a module for less everyday use.

An L-shaped rail makes use of the angle for long clothes, with both wings connected. In the corner, curved or wedge-shaped shelves avoid dead corners. If you prefer drawers, corner drawers must go in straight sections, never in the angle itself. Think about height too: everyday clothes go between hip and shoulder height, and seasonal items up high. The section at the corner at eye level is the most comfortable for things you consult often. The clearer you are about what you'll keep in each section, the better the interior of your corner wardrobe is laid out.

07

What to check in the design before we build

  • 01

    Before moving on to production, we go over five points: that each door opens without colliding, that the corner is accessible, that the corner module fits the real walls, that the drawers don't clash with the neighbouring doors, and that the finishing at the ceiling and the plinth close up properly.

  • 02

    Manufacturing takes two to three weeks on average, and the installation is arranged separately. A corner wardrobe is fitted from the inside out, starting with the corner, and levelled at the end with the adjustment profiles. Also check which way each door opens and which handle you'll use in the corner section. It's the last chance to change something, so it's worth going over the plan calmly.

Enquiry

Tell us about your project in Lucena

  1. 1We read your message and look at your photos.
  2. 2We reply on WhatsApp with a first figure.
  3. 3We measure up and prepare the final quote. The measuring visit costs €50 if you don't go ahead with the order and is free if you do.

We don't cut a single board until you've approved the design and the price.

Your fitted wardrobe

2 MIN

We'll prepare a WhatsApp message for you. You can review it before sending and attach your photos directly in the chat.

Questions

Frequently asked questions about wardrobes in Lucena

After installation: warranty and care for your wardrobe.

What's the difference between an L-shaped wardrobe and a corner wardrobe?

An L-shaped wardrobe has two wings that meet at a right angle. "Corner wardrobe" is the general term; it can be L-shaped, diagonal or made of straight modules joined together.

How do you make use of the back of the corner?

With carousels, pull-out trays or a door that opens the whole section. You can also reserve the corner for things you only use occasionally.

Does it work in a small room in Lucena?

Yes, because it adds storage in the corner without taking up free walls. You just need to make sure the doors don't get in the way of passing through.

Can the doors of the two wings collide?

If it isn't planned, yes. It's avoided with sliding doors on one wing or with a fixed module in the corner.

Does the corner have to be perfectly square?

No. Closing modules and adjustment profiles absorb any deviations in the walls.

What measurements are needed to get started?

The length of the two walls, the height, the depth available, and photos of the corner showing windows and sockets.

Shall we talk about your project?

Send us a photo of the space and some approximate measurements on WhatsApp: we'll give you some initial guidance and arrange the measuring visit.

Your satisfaction is our priority We listen to your ideas and go through the measurements, finishes and every detail of the project with you.
WhatsAppQuote