Care, adjustments and maintenance for your wardrobe in Lucena

A made-to-measure wardrobe lasts longer and looks better when it is cleaned with the right product and its hinges, runners and handles are checked from time to time. This page brings together wardrobe care advice by finish, explains how to report an adjustment that is still pending, and sets out which photos and details are helpful to send. The specific terms that apply to your project are set out in writing in the quote you receive before approving your order.

Shape your next wardrobe.

Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.

Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.

01

Where to find the conditions for your project

Every order has its own quote, and that document sets out the terms that apply to your furniture. Keep it together with the approved design, the list of materials and any message in which changes were agreed, as these are the reference for any later query.

This page does not set out deadlines or commitments of its own: it offers practical advice on use and explains how to let us know if something isn't working as you expected. If you can't find your quote, ask for a copy by the same route you received it.

White fitted wardrobe with plain doors and an open wooden interior in a bright bedroom in Lucena
02

Cleaning according to the finish

The finish matters. Melamine and matt lacquered doors should be cleaned with a soft cloth and water with a few drops of mild soap, then dried so no marks are left. Gloss finishes appreciate a microfibre cloth, and wood-effect finishes shouldn't be soaked at the edge, especially along the edges of the boards.

Avoid scourers, bleach, solvents and abrasive cleaners: they leave a dull film or scratches that are hard to get rid of. Try any new product in a discreet corner first. For natural wood veneer, use a barely damp cloth and, if the finish manufacturer recommends it, a specific treatment from time to time.

Have you already measured the space?

Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.

03

Hardware, runners and hinges

  • 01

    The moving parts need little, but not nothing. The runners of sliding doors collect dust and fluff that slow the travel: go over them with a dry brush or the narrow nozzle of the vacuum cleaner every so often. If a door sticks, don't force it; first check whether there is dirt or an object in the track.

  • 02

    With hinges, check from time to time that the screws are still tight. A door that rubs or sags can be corrected with the adjustment screws, which move the door a few millimetres up, down or sideways. If you don't feel confident, it's better to describe the problem and send a photo than to take the door off.

04

Humidity, light and heat

A wardrobe suffers whatever the room suffers. Humidity swells the edges of the boards, direct sun fades the doors over time, and a radiator right next to the furniture dries out the wood and expands the joints. Airing the room for a few minutes every day and keeping the wardrobe away from heat sources prevents most problems.

In a home in Lucena with south-facing windows, it's worth drawing the curtains during the middle hours of summer so the sun doesn't fall directly on one side of the wardrobe. Inside, anti-humidity sachets help in wardrobes on exterior walls, and you shouldn't load the shelves beyond what they can bear: if you notice them bending, spread the weight out.

Instagram

Latest work by SI, ARMARIO

@si.armario

Made-to-measure wardrobes and walk-in wardrobes

Latest posts

05

How to report an adjustment that is needed

If you notice a misaligned door, a drawer that rubs or a trim piece that doesn't close properly, let us know as soon as possible and in writing. Ideally, say what is happening, since when and in which part of the wardrobe, along with the name the order was placed under and the installation address.

The more specific the description, the faster the cause can be identified: an adjustment, a fitting that needs replacing or an installation detail. That's why we recommend not tinkering with it before sending your message, so we can see its actual state. After that, we'll tell you how to proceed.

Fitted wardrobe with white sliding doors and a light wood interior in a bright bedroom in Lucena
Measuring visit

Ask us to come and measure up in Lucena

  • 01You leave us your name and your area.
  • 02We message you on WhatsApp to agree a day.
  • 03The measuring visit costs €50 and is free if you place an order.
06

What to send when you ask for help

Send three photos: one of the whole wardrobe, one close-up of where you see the problem, and a third with the door or drawer open. If you can, record a short video of the movement that isn't working, because sometimes the sound and the travel explain more than a still image.

Add the project reference, the approximate installation date and your contact details. There is no need to publish anything personal: the usual contact channels are enough. If yours is a new project rather than a query about one already completed, start with the configurator or the quote form.

Questions

Frequently asked questions about wardrobes in Lucena

How do I report that my wardrobe needs an adjustment?

Write to us through the same channel you used to arrange your order, or via the contact page, with the project reference and the photos. It will be logged there and we'll explain the next step.

What photos help to identify an adjustment?

An overall view of the wardrobe, a close-up of the detail and an image with the door or drawer open. That is usually enough to tell a simple adjustment from a part that needs attention.

Where can I find the terms of my project?

In the quote you approved, which sets out what was agreed for your order. Keep it with the rest of the documents for the order and check it before writing to us.

How do I know which cleaning product to use?

Always start with water and mild soap on a soft cloth. For a particular finish, such as wood veneer or a gloss lacquer, ask which product is suitable if the materials sheet for your project doesn't say.

Shall we talk about your project?

Send us a photo of the space and some approximate measurements on WhatsApp: we'll give you some initial guidance and arrange the measuring visit.

Your satisfaction is our priority We listen to your ideas and go through the measurements, finishes and every detail of the project with you.
WhatsAppQuote